They were produced in Russia, which in itself means that they are adapted to Russian conditions, where there are not only cold temperatures for more than half of the year, but also special soil characteristics.
To make it more clear, let’s look at two models from the line of these walk-behind tractors – Salyut 100 and Salyut 5.
100
Salyut 100 seems to be an improved unit that has absorbed all the advantages of previous models, while correcting design flaws.
Due to the fact that the center of gravity is now focused on the front of the walk-behind tractor, it has become more stable on the territory, so there is no risk of the unit tipping over.
The location of the gear shift lever has also become more convenient. If previously it was placed on the gearbox, now the lever is located on the control handle itself, which greatly simplifies control of the device.
Due to the fact that the walk-behind tractor is easily disassembled, it can be freely transported in your car and then reassembled, if necessary.
The new walk-behind tractor has a 4-stroke engine running on regular AI-92 gasoline. In this case, the maximum power of the motor used will reach slightly less than 7.5 hp, with a fuel consumption of 1.5 liters per hour of operation.
In principle, this is a pretty good indicator of efficiency for an engine of this power. In addition, you can install attachments for the Salyut 100 walk-behind tractor, which will further increase its performance.
Large diameter wheels
The design of the unit uses wheels with an increased diameter, which can significantly increase the cross-country ability of the walk-behind tractor in the most difficult areas. Unlike previous models, the equipment of the Salyut 100 walk-behind tractor has been somewhat expanded. It now includes the following devices:
- four cultivators;
- cutters;
- discs providing plant protection;
- vomer;
- oil dipstick;
- hitch for additional equipment.
Specifications:
- engine capacity – 196 cm3;
- brand of engine used – Lifan 168F-2B;
- fuel tank volume – 3.6 l;
- gears - four forward and two reverse;
- maximum speed – up to 8 km/h;
- width of the processed strip – up to 98 cm;
- digging depth – 25 cm;
- unit length – 151 cm;
- unit width – 62 cm;
- unit height – 133.5 cm;
- total weight – 95 kg.
For more details about the operation of the Salyut 100 walk-behind tractor, watch the video:
5
The next representative of the model range is the Salyut 5 walk-behind tractor, which belongs to the small-sized category. The manufacturer recommends operating this unit at temperatures up to +400C, but use in cold weather is undesirable.
The unit is equipped with a 4-stroke gasoline engine (the design of this walk-behind tractor uses a variety of motors, which are indicated in the accompanying technical data sheet for a particular unit). It is worth remembering that the first hours of operation are trial periods when the engine gets used to the load.
Therefore, you need to gradually increase the digging depth, starting from the minimum value.
Specifications:
- type of engine used - 4-stroke, gasoline;
- engine capacity – 160 cm3;
- maximum power – 5.5 hp;
- brand of engine used – Briggs
- fuel tank volume – 3.5 l;
- gears - two forward and one reverse;
- width of the processed strip – up to 90 cm;
- digging depth – 30 cm;
- unit length – 86 cm;
- unit width – 53 cm;
- unit height – 82 cm;
- total weight – 78 kg.
Additional accessories can be perfectly combined with these models. equipment for the Salyut walk-behind tractor, which significantly expands the boundaries of their use.
Optional equipment
Attachments for Salyut walk-behind tractors are widespread not only in Russia, but also in the countries of the former Union - Kazakhstan, Belarus, etc. Due to the fact that the climatic conditions in these countries are almost identical, the Salut walk-behind tractor is in sufficient demand.
Owning a personal plot involves not only outdoor picnics on weekends, but also carrying out certain soil cultivation work. The Swift cultivator will help you with this.
A snow surface is far from being the best surface for cars, so in snowy areas it is necessary to use other modes of transport that allow you to successfully move on such a surface. By following the link you will get acquainted with the Varyag 550 snowmobile.
To spray all kinds of fertilizers, various fertilizers and all sorts of chemicals to protect plants from harmful insects, it’s a good idea to have a special device. all about the characteristics of the Zhuk sprayer.
The Salute walk-behind tractor and its attachments, the prices of which you will find out a little later, are a fairly universal country “helper” that can significantly simplify and reduce the time spent working on the land. This is evidenced by the list of works feasible for this unit:
- plowing of land holdings;
- hilling up beds;
- digging up potatoes and beets;
- hay making;
- snow removal in winter, etc.
In addition, you can use the hay harvesting unit as a mower for cutting lawns in your garden. It is only important to adjust the cutting height of the grass surface.
Having understood the work that a walk-behind tractor is capable of carrying out, you can move on to a description of the technical means that help carry out this work. In particular, attachments for the Salyut 5 walk-behind tractor, as well as other models in the line.
In total, there are several types of equipment that can be aggregated with Salyut walk-behind tractors:
- plows;
- potato diggers;
- hillers of various types;
- potato planters;
- lugs, etc.
Let's look at several types of attachments, as well as their approximate cost.
The KM-0.5 mower is capable of cutting short grass. Thanks to the high rotation speed (up to 2400 rpm), this unit is capable of mulching quite quickly.
Specifications:
- width of the processed strip – 500mm;
- maximum speed – up to 4 km/h;
- height of mowed grass surface – up to 1000 mm;
- total weight – 35 kg.
The cost of this attachment is about 12 thousand rubles.
Rotary mower
Connecting a rotary mower will be slightly different. We connect it to the power take-off shaft of the Salute walk-behind tractor by tensioning the belt. The same manipulations are needed to connect the walk-behind tractor with the snow blower.
Conclusion
Attachments seem to be an additional auxiliary tool that can significantly increase the scope of application of a walk-behind tractor (for example, a caterpillar for a Neva walk-behind tractor).
Thanks to it, it is possible to carry out absolutely all the work typical of rural areas, where the main concerns lie in planting and subsequent harvesting.
Of course, you will have to purchase additional equipment separately from the walk-behind tractor, which may seem like a rather large price to pay for the opportunity to fully work on the ground.
However, owners of large farms will appreciate all the advantages that such devices provide, because they allow you to cultivate dozens of acres of land at an accelerated pace. In conditions of high competition in the field of cultivation and subsequent sale of crops, this can play a decisive role.
Mounting 100 is an opportunity to expand the functionality of the machine to perform various agricultural work.
Characteristics of the walk-behind tractor
Salyut 100 is one of the best Russian-made walk-behind tractors designed for agricultural work. The model is equipped with a 4-stroke Lifan engine with a power of 6.5 liters. pp., which characterizes it as highly productive and reliable. The advantages of the unit over other models are as follows:
- Small turning radius of the unit, providing increased maneuverability of the walk-behind tractor.
- Wheels with increased diameter. Thanks to them, the design can work on different types of soil.
- The Salyut 100 has a speed switch on the steering wheel, which is much more convenient than the location on the gearbox.
- The low center of gravity gives the unit stability; the equipment will not tip over during operation.
- Dimensions – 1.5*0.62*1.3 m, the design is quite compact.
- Fuel consumption is 1.5 l/hour, which is not a high result for an engine of this power.
- The design of the walk-behind tractor is collapsible, so it is easy to transport even in the trunk of a car.
The motor cultivator is used for plowing the soil and cutting ridges.
Attachments for walk-behind tractor Salyut 100
The unit, supplemented with attachments, performs the following tasks:
- planting and digging root crops;
- hilling;
- mowing grass;
- clearing the area of debris and snow;
- transportation of crops.
Installing the adapter
The adapter is a structure on wheels with a seat installed on it. Such attachments for the Salyut 100 walk-behind tractor allow the operator to facilitate the work and protect himself, especially if the soil is processed with cutters. The adapter can be used to mount a harrow, plow, hillers and other technical installations.
If we classify designs by purpose, we can distinguish 2 types: simple and universal. The first type of adapters will be needed for cultivating the soil. The second is suitable not only for this purpose, but also for transporting cargo.
Some adapters for walk-behind tractors have a track width adjustment - a function designed to allow the owner to adjust it depending on the size of the bed.
Application of mower
A mower is a device that is attached to a walk-behind tractor and is used for cutting grass. They can be classified into:
- – suitable for level soil, mows low, sparse plants;
- rotary (or disk)– more universal, adapt to uneven terrain and grass density.
The most adapted attachment for the Salyut 100 walk-behind tractor is the Zarya mower. It copes well with shrubs and climbing plants even on flat landscapes.
Potato digger
A potato digger is a design that will facilitate and speed up potato harvesting. The most primitive model consists of a knife that digs up root crops and a filtration grid. The operator can adjust the digging depth.
The most popular addition to the Salyut 100 unit is the KV-3 model potato digger weighing 5 kg.
Potato planting unit
A potato planter is a mechanism used for planting potatoes. The principle of operation is as follows: a small plow digs a hole, 1 root crop comes into it from the bunker, after which the hiller buries the hole. The device allows the use of fertilizers.
This design is simple and easy to use, it provides adjustment:
- digging depths;
- hole width;
- distances between holes.
Among the advantages of the potato planter are its small dimensions and weight. For the Salyut 100 walk-behind tractor, the KS-1 model is better suited than the others.
Hiller installation
Hiller is a type of additional equipment for a walk-behind tractor. There are 2 main types of these devices.
Disc hiller– equipped with discs, the diameter differs depending on the model. With its help, the unit buries furrows with planted root crops (onions, potatoes and others) and hills the beds.
Classic or arrow-shaped hiller more common among walk-behind tractor owners. Equipped with two petals with an adjustable distance between them. In addition to hilling, it is capable of cutting furrows for planting root crops. For faster work, you can mount 2 arrow-shaped hillers, if the type of soil and the power of the walk-behind tractor allow it.
With such attachments on the Salyut unit, you can process at least 10 hectares of land in 8 hours.
Walk-behind tractor with trailer
A walk-behind tractor equipped with a trailer is able to transport crops or cargo. You can also use it to prepare hay for the winter.
There are many types of trailers suitable for different tasks:
- with galvanized steel body– such a unit can be used in any weather, even in rain;
- with folding sides– this makes loading and unloading operations more comfortable;
- with tool box under the seat– for storing items for work;
- with different dimensions and load capacity- depending on the purpose of use.
The presence of this additional equipment for the walk-behind tractor will speed up and simplify the harvesting process.
Installation of cutters
Mills are designed for surface tillage of soil. The design consists of a shaft to which knives are attached or welded; in the process of rotation, they loosen the ground and chop up weeds. One of several types of such installation can be attached to the Salyut 100 walk-behind tractor.
The design is collapsible, it consists of an axis with knives screwed on bolts; in one set they are sharpened on the right side, in the other - on the left. Such cutters are usually included with the Salyut 100 unit. High performance is shown on soft or sandy soil without weeds.
This type of additional equipment has an all-welded design, here knives with triangular tips are welded to the axle.
Like the previous type, the knives of the device are welded to the axis, but in this case - in a spiral. “Virgin soil” is characterized by high productivity; it slowly but perfectly loosens any soil: heavy, with grass, clay.
Milling, unlike plowing, does not destroy humus and does not contribute to soil erosion.
The Salyut 100 walk-behind tractor is a universal unit; the ability to attach attachments allows it to perform a wide range of work faster and easier.
The use of machinery when cultivating land in small holdings has become a necessity. The Salute walk-behind tractor is used by villagers all year round. With the help of a small, nimble mechanism, you can perform all labor-intensive excavation work, mow and even remove snow in winter. There are several models of this unit. The choice of assistant depends on the nature and volume of work in the personal household.
Line of walk-behind tractors
Walk-behind tractors are divided according to engine power. The stronger the motor pulls, the more efficiently the walk-behind tractor works. But you can’t install a strong motor on a frame designed for a baby. The frame, shafts, couplings and grips are designed to match the engine. The Salute walk-behind tractor is produced as heavy and medium-power equipment in its segment. The developer and implementer of the model is the Salyut defense plant. Depending on the engine installed on the equipment, the power characteristics and weight of the unit change slightly. For clarity, the main indicators of the Salyut 5 and Salyut 100 walk-behind tractor are placed in a general table.
Other engines are also used in the line of manufactured equipment, giving models equipped with them better performance and energy consumption properties. Salyut walk-behind tractors equipped with a Chinese Lifan engine are reliable, and you can buy an assistant for a little more than 20 thousand. This model is characterized by:
- the speed switch is located on the steering wheel;
- stability due to a low center of gravity;
- small turning radius and high maneuverability.
In other configurations, Kohler SH265, Honda GC 190, Robin Subaru EY-20 engines are used.
The difference between the Salyut 5 and Salyut 100 walk-behind tractor is the different number of speeds. Otherwise, they perform the entire range of agricultural work in the same way using attachments. Some of the working units are supplied complete with the unit, others are purchased or made independently. A well-thought-out frame design and good alignment make the main unit stable and multifunctional. Using a belt drive, the unit is used as a power unit for woodworking machines. If transportation is necessary, the walk-behind tractor can be easily disassembled into individual units.
Buy spare parts for equipment from trusted suppliers. The aftermarket is filled with low-quality, artisanal parts.
But more often the unit performs its direct functions using special attachments for the Salyut walk-behind tractor. So, you can cultivate the soil with sickle-shaped cutters, which will crush and loosen the soil to a depth of 25-30 cm. Depending on how many nodes are installed on the shaft, 30, 60 or 90 cm are processed in one pass. And if the soil is clayey, hard, or virgin soil, A walk-behind tractor with a plow will easily break into gear and lift up a layer of earth.
For installation of agricultural mounted implements, the unit is equipped with a special adapter. The transfer of energy to the pin through the power take-off roller allows multi-purpose year-round use of the Salyut 100 walk-behind tractor, watch the video:
Attachments included with walk-behind tractor
The walk-behind tractor comes with only a minimum of canopies, which will allow you to master the equipment and understand its resource. The most important thing for moving across fields and off-road is the presence of wheels of large diameter and with self-cleaning deep tread. This corrugation provides good traction with the soil and increases the permeability of the unit. The set contains 4 cultivators, 2 mounted on each side, cultivating 60 cm of soil. For greater coverage, 2 cultivators will need to be purchased. The kit includes:
- cutters;
- vomer;
- hitch for equipment.
To fully utilize the resource of a powerful walk-behind tractor, it is necessary to purchase or manufacture attachments and additional devices.
To cultivate the land you will need a plow and a hoe. And to harvest the crop you will need a potato digger. During the haymaking season, using a mower, rake, or segmented scythe for cutting lawns will eliminate the need to purchase highly specialized tools.
A transport cart in a rural farmstead will help to cope with the transportation of crops to storage, hay to the storage site. In winter, using a rotary snow blower, you can clean up your yard after a snowfall in five minutes.
What attachments are purchased for Salyut walk-behind tractors?
Despite the powerful engine, the unit can only be equipped with recommended mounted and trailed implements and equipment. Therefore, it is necessary to study the characteristics of the equipment and purchase it if it is recommended for use in conjunction with the Union.
Transport devices
The trolley cannot have a load capacity higher than 500 kg. It is equipped with a separate brake and has a seat. You can make the appropriate trailer yourself. The manufacturing company produces adapted equipment. Trailer TPM-350-1 with a galvanized bottom, 1.2 meters long and 1.0 meters wide. The weight of the product is 93 kg, the cost is 19 thousand rubles.
Hillers for walk-behind tractor
The use of hillers for summer work is multifaceted. They add soil from the furrow to the plants, cut the furrows during planting and cover them. Therefore, the design of the hiller is selected for a specific type of work. If used as a trailer for traction with low power, non-adjustable hillers are chosen. This is a rigid structure that extends like an arrow into the soil to the required depth. Rising upward, diverging ribs create a furrow, filling the bases of the bushes. Such hillers work effectively on even rows with a consistent standard size.
Another type of hiller for the Salyut walk-behind tractor is. Adjustable inclination and distance discs allow you to create an even stroke. The diameter of the disk is 40 cm, which allows for high hilling. The cost of the devices is 800-1700 rubles. Often a villager cannot do without a plow. This weapon is not supplied as a kit; it costs about 2 thousand. Hillers and plows are connected to the main unit through a beam and a bracket.
Haymaking and lawn care equipment
A snow blower will also be an attachment driven by a belt drive.
When using high-risk tools, mowers, we must not forget about our own protection. At a minimum, closed clothing, shoes and safety glasses should be used.
Haymaking is suffering. The faster you cut the grass and dry it, the more nutritious the food will be. The use of mowing sheds facilitates and speeds up the harvesting process. Depending on the density and height of the grass stand, segment or rotary tools are used. Segmented scythes are good on flat areas and short grass. They are ideal for mowing the lawn. Mowers for the Salyut walk-behind tractor of the KM-0.5 segment type cut short grass with mulching. The working width is half a meter, the speed is 4 km/h, the weight of the device is 35 kg. The equipment costs 12 thousand rubles.
The rotary mower for the Salute walk-behind tractor consists of two discs with knives mounted on a rigid frame. The design is called Zarya. This device easily copes with tough old grass and twigs. The height of the cutters is adjusted automatically to adapt to uneven ground conditions.
Specifications:
- mowing width - 80 cm;
- travel speed – 4 km/h;
- height of mowed grass – 100 cm;
- equipment weight - 31 kg.
You can buy a rotary mower for a Salute walk-behind tractor for 14 thousand rubles.
To care for the pre-house area during the winter months, you can hang a snow blower on a walk-behind tractor and a brush for removing debris on a dry railing. But the necessary devices will be lugs mounted in place of the wheels. They will create straight rows when planting, which will greatly simplify the care of plantings during the growing season.
The wheels represent a design with dimensions:
- diameter – 28 cm;
- width – 9 cm;
- hub diameter 3.4 cm.
Not all the equipment that will make life easier for a villager using a multifunctional walk-behind tractor is listed.
Motoblock repair
Spare parts for the Salute walk-behind tractor are easy to buy. This is domestic technology. For imported engines used in walk-behind tractors, spare parts supplied for generators and compressors are suitable. Therefore, you just need to order the required part according to the specification on the website or at a service point.
Review of the Salyut 5 walk-behind tractor with a power frame - video
The capabilities of agricultural machinery are determined by the ability of the attachment to easily adapt to the Salyut walk-behind tractor and effectively carry out essential agricultural work for summer residents and gardeners. It’s clear that the more diverse the list of auxiliary devices, the greater the number of them that can be mechanized, thereby using the equipment as efficiently as possible.
“Salyut-100” and the earlier modification “Salyut-5” are rationally aggregated with more than 50 types of modern attachments, adapted to perform many useful jobs.
The kit with the Salute walk-behind tractor includes a minimum list of accessories.
To perform specialized work, appropriate attachments have been created, which are purchased separately. Let's take a closer look at the different types of these devices.
Adapter
The adapter is a specific towed device for a walk-behind tractor. The operator can perform various tasks while sitting on a comfortable seat and easily controlling the walk-behind tractor. Having an adapter, many functions can be performed much more efficiently and safely, especially when cultivating the soil with cutters.
Depending on the purpose, there are various designs of adapters for the Salute walk-behind tractor:
- simple - intended purely for cultivating the land;
- universal - designed for transportation of goods, various types of soil treatment.
For heavy powerful machines, adapters with a long drawbar are installed, for light modifications - with a short one. Modifications of adapters with additional functionality have been developed - lifting the overall linkage, widening the track.
Mower
One of the most difficult types of rural work is mowing. With a mounted mower on a Salyut walk-behind tractor, today this is quite an ordinary job.
Mowers for the Salute walk-behind tractor are:
- segmental - for mowing evenly growing thin grass on flat surfaces;
- disc (rotary) - better suited for mowing grasses of different qualities. Taking into account the density, hardness, lodging of the grass layer, and the quality of dead wood, you can optimally configure the rotary mower in accordance with the speed of the machine and engine rotation.
The Zarya disc mower works well with the Salyut walk-behind tractor, the capabilities of which allow you to mow bushes and tangled, lying grass. The video shows the effective operation of the Zarya mower, which works on the principle of a regular scythe - it mows and lays the grass into even swaths.
Video review of the operation of the Zarya mower on the Salyut walk-behind tractor
Potato digger
Labor-intensive, extremely tedious work - digging potatoes - can be significantly simplified with the help of a mounted potato screener. No damaged tubers, no shovels - a minimum of time, effort and excellent results.
Potato digger 
Potato digger KV-3
As an attachment for the Salyut walk-behind tractor, a KV-3 potato digger weighing 5 kg is the most popular device.
Potato planter
The potato planter is a not so popular attachment for the Salute walk-behind tractor.
As is usually the case, in small country gardens, potatoes are planted using the extensive method - a friendly raid of all relatives and friends. On large leased plots, the effectiveness of using a potato planter as an attachment is undeniable. You can see the operation of a potato planter on a walk-behind tractor in the video.
Video review of the operation of a potato planter on a Salyut-100 walk-behind tractor
Okuchniki
Planting and sowing is one thing to worry about, but weeding, hilling and tireless weed control - these chores on the site sometimes take quite a lot of time. Hilling up using a Salyut walk-behind tractor with a universal harrow is easier than plowing the land; you just need to correctly adjust the angle of attack of the equipment.
Safety shields cover the cutters from above; special discs are installed on them to protect plants; the knives have a characteristic sickle shape. Such equipment allows high-quality processing of a strip up to 1 m wide or narrow row spacing in one pass.
Hitch
Depending on the tasks assigned, there are 3 types of coupling equipment:
- A single hitch is used for mounting and adjusting attachments on the Salyut walk-behind tractor;
- Universal double hitches can be used on any walk-behind tractor;
- Coupling units with a hydraulic mechanism are used to adapt a screening-type potato digger with a walk-behind tractor; they make it possible to more accurately adjust the direction of work.
Single hitch 
Universal double hitch 
Hitch units with hydraulic mechanism
They were produced in Russia, which in itself means that they are adapted to Russian conditions, where there are not only cold temperatures for more than half of the year, but also special soil characteristics.
To make it more clear, let’s look at two models from the line of these walk-behind tractors – Salyut 100 and Salyut 5.
100
Salyut 100 seems to be an improved unit that has absorbed all the advantages of previous models, while correcting design flaws.
Due to the fact that the center of gravity is now focused on the front of the walk-behind tractor, it has become more stable on the territory, so there is no risk of the unit tipping over.
The location of the gear shift lever has also become more convenient. If previously it was placed on the gearbox, now the lever is located on the control handle itself, which greatly simplifies control of the device.
Due to the fact that the walk-behind tractor is easily disassembled, it can be freely transported in your car and then reassembled, if necessary.
The new walk-behind tractor has a 4-stroke engine running on regular AI-92 gasoline. In this case, the maximum power of the motor used will reach slightly less than 7.5 hp, with a fuel consumption of 1.5 liters per hour of operation.
In principle, this is a pretty good indicator of efficiency for an engine of this power. In addition, you can install Salyut 100 for the walk-behind tractor, which will further increase its performance.
Large diameter wheels
The design of the unit uses wheels with an increased diameter, which can significantly increase the cross-country ability of the walk-behind tractor in the most difficult areas. Unlike previous models, the equipment of the Salyut 100 walk-behind tractor has been somewhat expanded. It now includes the following devices:
- four cultivators;
- cutters;
- discs providing plant protection;
- vomer;
- oil dipstick;
- hitch for additional equipment.
Specifications:
- engine capacity – 196 cm3;
- brand of engine used – Lifan 168F-2B;
- fuel tank volume – 3.6 l;
- gears - four forward and two reverse;
- maximum speed – up to 8 km/h;
- width of the processed strip – up to 98 cm;
- digging depth – 25 cm;
- unit length – 151 cm;
- unit width – 62 cm;
- unit height – 133.5 cm;
- total weight – 95 kg.
For more details about the operation of the Salyut 100 walk-behind tractor, watch the video:
5
The next representative of the model range is the Salyut 5 walk-behind tractor, which belongs to the small-sized category. The manufacturer recommends operating this unit at temperatures up to +400C, but use in cold weather is undesirable.
The unit is equipped with a 4-stroke gasoline engine (the design of this walk-behind tractor uses a variety of motors, which are indicated in the accompanying technical data sheet for a particular unit). It is worth remembering that the first hours of operation are trial periods when the engine gets used to the load.
Therefore, you need to gradually increase the digging depth, starting from the minimum value.
Specifications:
- type of engine used - 4-stroke, gasoline;
- engine capacity – 160 cm3;
- maximum power – 5.5 hp;
- brand of engine used – Briggs
- fuel tank volume – 3.5 l;
- gears - two forward and one reverse;
- width of the processed strip – up to 90 cm;
- digging depth – 30 cm;
- unit length – 86 cm;
- unit width – 53 cm;
- unit height – 82 cm;
- total weight – 78 kg.
Additional accessories can be perfectly combined with these models. equipment for the Salyut walk-behind tractor, which significantly expands the boundaries of their use.
Optional equipment
Attachments for Salyut walk-behind tractors are widespread not only in Russia, but also in the countries of the former Union - Kazakhstan, Belarus, etc. Due to the fact that the climatic conditions in these countries are almost identical, the Salut walk-behind tractor is in sufficient demand.
Owning a personal plot involves not only outdoor picnics on weekends, but also carrying out certain soil cultivation work. This will help you.
A snow surface is far from being the best surface for cars, so in snowy areas it is necessary to use other modes of transport that allow you to successfully move on such a surface. By clicking on you will get acquainted with the Varyag 550 snowmobile.
To spray all kinds of fertilizers, various fertilizers and all sorts of chemicals to protect plants from harmful insects, it’s a good idea to have a special device. all about the characteristics of the Zhuk sprayer.
The Salute walk-behind tractor and its attachments, the prices of which you will find out a little later, are a fairly universal country “helper” that can significantly simplify and reduce the time spent working on the land. This is evidenced by the list of works feasible for this unit:
- plowing of land holdings;
- hilling up beds;
- digging up potatoes and beets;
- hay making;
- snow removal in winter, etc.
In addition, you can use the hay harvesting unit as a mower for cutting lawns in your garden. It is only important to adjust the cutting height of the grass surface.
Having understood the work that a walk-behind tractor is capable of carrying out, you can move on to a description of the technical means that help carry out this work. In particular, attachments for the Salyut 5 walk-behind tractor, as well as other models in the line.
In total, there are several types of equipment that can be aggregated with Salyut walk-behind tractors:
- plows;
- potato diggers;
- hillers of various types;
- potato planters;
- lugs, etc.
Let's look at several types of attachments, as well as their approximate cost.
The KM-0.5 mower is capable of cutting short grass. Thanks to the high rotation speed (up to 2400 rpm), this unit is capable of mulching quite quickly.
Specifications:
- width of the processed strip – 500mm;
- maximum speed – up to 4 km/h;
- height of mowed grass surface – up to 1000 mm;
- total weight – 35 kg.
The cost of this attachment is about 12 thousand rubles.
Rotary mower
Connecting a rotary mower will be slightly different. We connect it to the power take-off shaft of the Salute walk-behind tractor by tensioning the belt. The same manipulations are needed to connect the walk-behind tractor with the snow blower.
Conclusion
Attachments seem to be an additional auxiliary tool that can significantly increase the scope of application of a walk-behind tractor (for example).
Thanks to it, it is possible to carry out absolutely all the work typical of rural areas, where the main concerns lie in planting and subsequent harvesting.
Of course, you will have to purchase additional equipment separately from the walk-behind tractor, which may seem like a rather large price to pay for the opportunity to fully work on the ground.
However, owners of large farms will appreciate all the advantages that such devices provide, because they allow you to cultivate dozens of acres of land at an accelerated pace. In conditions of high competition in the field of cultivation and subsequent sale of crops, this can play a decisive role.
